Dashy in Alpine from source

Install dependencies: git, yarn, npm

apk add --update git yarn npm

Get Code: git clone https://github.com/Lissy93/dashy.git and cd dashy
Configuration: Fill in you're settings in ./user-data/conf.yml (by default no changes needed)

git clone https://github.com/Lissy93/dashy.git
cd dashy

Ensure that you have the Vue CLI installed globally on your system. Run the following command:

npm install -g @vue/cli

Or just we can make sure all the project dependencies are installed. Navigate to your project directory and run from dask project dir:

npm install

We could check if we are up to date with but it 99% will brake the project build, try if you want:)

npm audit fix --force

Or we could just run:

npm audit fix --force

After that we build the package,(at least 2G of RAM for build is needed or use in compile procedure or use--memory=1024m (did not work in my case)

yarn build

The config file for dashy in located under the file .env. And finaly run the new project:

npm start

If it did not work at some place go to : https://dashy.to/docs/troubleshooting/

Auto start on BOOT

For Alpine linux we are using OpenRC not systemd or initd so we need diffrent script in /etc/init.d/
Our file will be dashy

#!/sbin/openrc-run

name="node_app"
description="Node.js Dashy application"
#define port if we want to run on diffrent
#export PORT=80

# Path to the Node.js application directory
APP_DIR="/home/USERdashy/"
PID_FILE="/var/run/${RC_SVCNAME}.pid"
LOG_FILE="/var/log/${RC_SVCNAME}.log"

command="npm"
command_args="start"
command_user="USER"

depend() {
    need net
}

start_pre() {
    checkpath -d -o ${command_user}:nogroup /var/run/${RC_SVCNAME}
    checkpath -d -o ${command_user}:nogroup /var/log/${RC_SVCNAME}
}

start() {
    ebegin "Starting ${name}"
    start-stop-daemon --start --quiet --background \
        --chdir "${APP_DIR}" \
        --exec "${command}" \
        -- ${command_args} \
        >> "${LOG_FILE}" 2>&1
    eend $?
}

stop() {
    ebegin "Stopping ${name}"
    start-stop-daemon --stop --quiet --pidfile "${PID_FILE}"
    eend $?
}

status() {
    status_of_proc -p "${PID_FILE}" "${command}" && eend 0 || eend 1
}

Now change the file to be executable, and make the script to the default runlevels to start on boot:

sudo chmod +x /etc/init.d/dashy
sudo rc-update add node_app default

And finaly run the script and connect to application to alpine IP and port 4000
And we should see the result like this:

rc-service dashy start

 

 

ICONS needed :)

So we need icons from , we will use this onehttps://github.com/walkxcode/Dashboard-Icons

 
cd /home//
git clone https://github.com/walkxcode/dashboard-icons.git


Create folder in dashy directory
mkdir -p user-data/item-icons/icons


Now move the icons to new location:

mv dashboard-icons/png/* dashy/user-data/item-icons/icons/ 
 
 

Transmission in Proxmox LXC containers

To allow containers to share same storage:
Config file of container: (/etc/pve/lxc/)

arch: amd64
cores: 1
features: nesting=1
hostname: transmossion
memory: 256
mp0: /USB/SEAGATE/NFS/TORRENT,mp=/TORRENT
nameserver: 192.168.1.1
net0: name=eth0,bridge=vmbr0,firewall=1,gw=192.168.0.1,hwaddr=XX:XX:XX:XX:XX:7F,ip=192.168.1.41/24,type=veth
onboot: 1
ostype: alpine
rootfs: local-lvm:vm-101-disk-0,mountoptions=lazytime,size=1G
swap: 256
unprivileged: 1

Change the file group ID:

chown -R 0:101000 /USB/SEAGATE/NFS/TORRENT 

To to allow connection to TRANSMISION from web GUI port 9091 edit the config file
FIRST STOP THE TRANSMISION (alpine i my cass uses inetd)

/etc/init.d/transmission-daemon stop

Edit the config file

vi /var/lib/transmission/config/settings.json 

    "rpc-whitelist": "192.168.1.*,127.0.0.1,::1",
    "rpc-whitelist-enabled": true,

Srart transmision after config change:

/etc/init.d/transmission-daemon stop